Hoover - 316SS Balls

Manufacturer of Precision Balls & Rollers

[CONTACT US]
[Alumina Oxide Balls]
[Aluminum Balls]
[Brass Balls]
[Burnishing Media]
[Carbon Balls]
[Chrome Balls]
[Grinding Media]
[Pen Balls]
[Plastic Balls]
[Rockbit Balls]
[Silicon Nitride Balls]
[302SS Balls]
[316SS Balls]
[316LSS Balls]
[420SS Balls]
[430SS Balls]
[440SS Balls]
[(TiC) Balls]
[Trimrite Balls]
[Tung. Carb. Balls]
[Injection Molding]
[MagCaps]

316 Stainless Steel Balls: Available Grades and Sizes *Balls per Pound*
Grade	Size Range in Inches
100 - 1000	1/8 - 2

Stainless Steel Balls Type 316 Download Product Sheet

AISI type 316 stainless steel balls meet requirements for an unhardened ball with excellent toughness and resistance to corrosion. Corrosion resistance may be increased through annealing. Both non-annealed and annealed balls are widely used in valves and related equipment.

AISI type 316 is an austenitic, chromium-nickel-molybdenum stainless steel and heat resisting steel with corrosion resistance superior to most other chromium-nickel stainless steels in many types of chemical corrodents, as well as, marine atmospheres.

Applications include phosphate industry parts, textile finishing equipment, printing equipment, body jewelry and valve industries.


	Material Analysis: All sizes and grades are of the highest quality and in accordance with AISI type 316. Passivation to ASTM A380 is available upon request..

Material	AISI	Federal	Military	ASTM	UNS	AMS
Stainless Steel Type 316	316	QQ-S-763	-	A-493	S-31600	-

Chemical Analysis:
Carbon............................................	0.08% maximum
Chromium........................................	16.0% to 18.0%
Manganese......................................	2.0% maximum
Silicon.............................................	1.0% maximum
Nickel.............................................	10.0% to 14.0%
Phosphorus.....................................	0.045% maximum
Sulphur...........................................	0.03% maximum

Mechanical Properties: Hardness as measured on parallel flat surfaces is Rockwell “C” 25-39.
Tensile Strength...............................	80,000 to 120,000 psi
Elongation in two inches...................	10.0% to 15.0%
Reduction in area.............................	55.0% to 65.0%
Modulus of elasticity.........................	28,000,000 psi
Density............................................	0.29 lbs./cu. in

[Home] [Contact Us] [Products] [Stock Liquidation] [Search Site] [Request Form] [Job Openings]