Hoover - S-2 Rockbit Balls

Manufacturer of Precision Balls & Rollers

[CONTACT US]
[Alumina Oxide Balls]
[Aluminum Balls]
[Brass Balls]
[Burnishing Media]
[Carbon Balls]
[Chrome Balls]
[Grinding Media]
[Pen Balls]
[Plastic Balls]
[Rockbit Balls]
[Silicon Nitride Balls]
[302SS Balls]
[316SS Balls]
[316LSS Balls]
[420SS Balls]
[430SS Balls]
[440SS Balls]
[(TiC) Balls]
[Trimrite Balls]
[Tung. Carb. Balls]
[Injection Molding]
[MagCaps]

S-2 Tool Steel (Rockbit) Balls: Available Grades and Sizes *Balls per Pound*
Grade	Size Range in Inches
100 - 200	3/8 - 1 1/2

S-2 Tool Steel Balls (Rockbit) Download Product Sheet

S-2 Tool Steel balls are designed to achieve extreme ruggedness. The ball surface has a smooth ground and polished finish. These balls provide the toughness and strength necessary for severe shock loads. S-2 Tool Steel balls are hardened throughout and have unusually good wear characteristics.

S-2 Tool Steel balls find most frequent use in oil field equipment and offshore drilling operations.
They provide good service in withstanding the abrasion of pulverized rock and mud slurries.


	Material Analysis: S-2 Tool Steel (Rockbit) balls are manufactured to the following chemical analysis:

Material	AISI	Federal	Military	ASTM	UNS	AMS	Military and Gov't Stds.
S-2 Tool Steel	S-2	QQ-T-570	-	A681	T-4190	-	-

Chemical Analysis
Carbon............................................	0.47% to 0.55%
Manganese.....................................	0.30% to 0.50%
Silicon............................................	0.90% to 1.10%
Molybdenum...................................	0.30% to 0.60%
Phosphorus.....................................	0.030% maximum
Sulpher...........................................	0.030% maximum
Vanadium.......................................	0.5% maximum

Mechanical Properties Hardness as measured on parallel flat surfaces is Rockwell “C” 55-58. Ball of special hardness are available upon request.
Tensile strength...............................	310,000 psi
Yield strength..................................	290,000 psi
Elongation in two inches...................	7%
Reduction in area.............................	25%
Modulus of elasticity........................	30,000,000 psi
Density...........................................	0.283 lbs./cu. in

[Home] [Contact Us] [Products] [Stock Liquidation] [Search Site] [Request Form] [Job Openings]