|
Balls: Torlon® (Technical name for Torlon® is polyamide-imide) |
||
|---|---|---|
|
Material |
Size Range |
Grade |
|
Torlon® |
|
|
|
Additional Services: Special sizes upon request. |
||
Torlon® polyamide-imide (PAI) is the highest strength and stiffness material of all thermoplastics with heat properties up to 525°F. It has outstanding resistance to wear, creep, and chemicals including strong acids and most organics and is ideally suited for severe service environments. The natural color of the raw material is olive. This material, in its natural state, is heavier than water, meaning Torlon balls sink in water. The ball blanks are injection molded or turned from extruded rod.
|
Approximate Values (Torlon® PAI) |
||||
|---|---|---|---|---|
|
Chemical Resistance |
Specific Gravity (grams/cc) |
Hardness (Rockwell) |
FDA Grade Available |
Maximum Operating Temperature |
|
Inert to most chemicals |
1.4 |
M 120 |
Yes |
525 Degrees Fahrenheit |
2200 Pendley Road, Cumming, Georgia 30041
Telephone: 770.889.9223 Fax: 770.889.0828
Email: sales@hooverprecision.com
© 2010 Hoover Precision Products
All Rights Reserved
Terms and Conditions
Website Design by SolutionBuilt.com